Die Steel EN31
Die Steel Round Bar is a high carbon Alloy steel that achieves a high
degree of hardness with compressive strength and abrasion resistance.
Die Steel D2
D2 steel is an air-hardening, high-carbon, high-chromium tool steel.
It has high wear and abrasion-resistant properties. It is heat
treatable and will offer a hardness in the range of 55-62 HRC, and is
machinable in the annealed condition. D2 steel shows little distortion
on correct hardening. D2 steel’s high chromium content gives it mild
corrosion-resisting properties in the hardened condition. Cold-work
tool steels include the high-carbon, high-chromium steels or group D
steels. These steels are designated as group D steels and consist of
D2, D3, D4, D5, and D7 steels. These steels contain 1.5 to 2.35% of
carbon and 12% of chromium. Except for type D3 steel, all the other
group D steels include 1% Mo and are air hardened. Type D3 steel is
oil-quenched; though small sections can be gas quenched after
austenitization using a vacuum.
Die Steel D3
Cold-work tool steels which include D2, D3, D4, D5, and D7 steels are
high-carbon, high-chromium steels. Apart from D3 steel all group D
steels have 1% Mo and are air hardened. Type D3 steel is oil-quenched;
though small sections can be gas quenched after austenitization using
a vacuum. As a result, tools made with type D3 steel tend to be
brittle during hardening. Type D2 steel is the most commonly used
steel among the group D steels. The D3 steels contain 1.5 to 2.35% of
carbon and 12% of chromium.
Die Steel SKD11
Molds for chemically aggressing Plastics & Plastics containing
abrasive Filters.
Applications:
This steel is easy turning and should be made sharp knife, scissors,
saw, cold or hot for repair mode, the drum side, the screw pattern,
line mode, cutters, impact mode, circular cylinder, the system of
power transformers heart dies, cutting steel Paper mill knives, steel
forming rollers, special molding roller, precision rules, shape
complexity of the cold tools, mandrels, metallurgy, tin for mold,
plastic mold, the screw head molds.
Die Steel SAE/AISI 52100
Alloy steels contain different varieties of steels that exceed the
composition limits of Mn, C, Mo, Si, Ni, Va, and B set for carbon
steels. They are designated by AISI four-digit numbers. They respond
more quickly to mechanical and heat treatments than carbon steels.AISI
52100 alloy steel is known as high carbon, chromium containing low
alloy steel. The following datasheet gives an overview of AISI 52100
alloy steel.
Die Steel CW1
Cold work tool steels are employed for the manufacture of tools for
applications involving surface temperatures below 200°C.In this
temperature range, the steel must feature the following properties in
order to guarantee tool resistance to the high stresses arising from
the numerous machining and shaping.
Die Steel HCHCR
Thread rolling dies, Hobs, Cold extrusion tools and dies, Punches,
Draw plates and dies, Cutters, Measuring tools, Pressure casting
molds, Blanking, Reamer, Finishing rolls for tyre mills. This type of
steel has high dimensional stability with added wear resistance
coupled with excellent edge holding qualities.
Die Steel OHNS
Blanking and stamping die, Punches, Rotary shear blades, Thread
cutting tools, Milling cutters, Reamers, Measuring tools, Gauging
tools, Woodworking tools, Broaches, Chasers. An ideal type of
oil-hardened steel that is economical and dependable for gauging,
cutting, and blanking tools as well as can be relied on for hardness
and good cutting performance.O1 Tool Steel is an electric-furnace
melted, oil-hardened, non-shrinking, general-purpose tool steel. It is
chemically composed of approximately 0.95 percent carbon, 1.1 percent
manganese, 0.6 percent chromium, 0.6 percent tungsten, and 0.1 percent
vanadium. The hardening temperature of O1 tool steel is between 790
degrees Celsius and 820 degrees Celsius.
Die Steel H13
Chromium hot-work tool steels are designated as group H steels
according to the AISI classification system. This series of steels
start from H1 to H19. The most commonly used chromium hot-work steels
are H11, H12, and H13, which can be air-hardened in 150 mm thick
sections. The steels are subjected to minimal distortion during
hardening due to their balanced alloy content. The tools produced from
chromium hot-work steels can be cooled using water without damage as
these steels have low carbon and alloy contents.
Die Steel H11
Chromium hot-work tool steels are designated as group H steels
according to the AISI classification system. This series of steels
start from H1 to H19. The most commonly used chromium hot-work steels
are H11, H12, and H13, which can be air-hardened in 150 mm thick
sections. The steels are subjected to minimal distortion during
hardening due to their balanced alloy content. The tools produced from
chromium hot-work steels can be cooled using water without damage as
these steels have low carbon and alloy contents.
People also search as: Die steel and Tool Steel, Die Steel and Tool
Steel Manufacturers, Die steel and Tool steel suppliers, Die steel and
Tool steel stockiest, Die steel and Tool steel dealers, Die steel and
Tool steel dealers, Die steel and Tool steel Traders, Die steel and
Tool Steel Wholesalers, Die steel and Tool Steel Stockholders, Die
steel and Tool steel Distributors, Die steel and Tool steel companies.