- About Us
- Bright Bar
- Black Bar
EN353 Steel Round Bar, EN353 Steel Round Bar Manufacturers, EN353 Steel Suppliers, EN353 Stockist, EN353 Steel Dealers, EN353 Steel Distributors, EN353 Wholesalers, EN353 Steel Traders, EN353 Steel Square Distributors, EN353 Steel Flat Bar, EN353 Steel Companies Near me.
We are EN353 Alloy Steel Round Bar manufacturers and we are manufacturing from prime quality billets and blooms. The range of EN353 Round Bars which we manufacture for our customers are of high quality and these round bars are used for making machinery and Auto components. These products have been made keeping in mind the quality parameters that have been set by the industry in the market. EN353 Round Bars are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customer’s requirements. EN353 alloy Steel round bars are supplied by us to various industries.
EN353 Alloy steel is a very high strength steel alloy that is hardened and tempered before supplying and has nickel, chromium, molybdenum making its high tensile steel strength, with good ductility and wear resistance. With relatively good impact properties at low temperatures, EN353 is also suitable for a variety of elevated temperature applications. EN353 round bars have good internal strength and high external strength, which makes them highly wear-resistant. EN353 steel round bars offer a good combination of ductility, strength, and wear resistance. EN353 is a very high-strength alloy engineering steel.
Acceptable for many automobile applications such as heavy-duty gear, shaft, pinion, camshafts, gudgeon pins.
BRITISH BS 970:1991 815M17
BRITISH BS 970:1955 EN353
GERMAN DIN 20NiCrMo5
FRENCH AFNOR 20NCD5
SWEDISH SS 2523
EUROPEAN STEEL NAME 17NiCrMoS6-4
EUROPEAN STANDARD EN10277-4
Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13, CW-1, M2, M35, M42, 2714, SKD-11, P20, P20+S, P20+Ni, SCM 420, ASTM SA-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C, S355J2G3.
Our Supply Range:
People also search as:
EN353, EN353 Steel, EN353 Chemical composition, EN353 Mechanical properties, EN353 Equivalent Grades, EN353 Steel plate, EN353 Steel sheet, EN353 Manufacturers, EN353 Suppliers, EN353 Dealers, EN353 Stockist, EN353 Distributors, EN353 Wholesalers, EN353 Traders.
The following table shows the chemical composition of En19 steel:
|Content (%)||0.10-0.20||0.10-0.35||0.50-1.00||0.040 Max||0.040 Max||0.75-1.25||0.08-0.15||1.00-1.50|
|Brinell Rockwell Hardness||150-200|
Other Detailed Properties:
|Ruling Section (mm)||150||150||100||65||65||30||30||25|
|Ruling Section (mm)||680/720||690/850||770/930||850/ 1000||930/ 1080||1000/1160||1080/1240||1280|
|Yield Stress (MPa)||440/480||480||570||665||740||835||895||1050|
|Elongation (% Min)||22||15||15||13||12||12||10||10|
|ISO V Impact (Joule)||30||30||30||30||25||25||22||7|
|Proof Stress (0.2%) if required (MPa, Min)||—||495||550||630||710||770||850||985|
HB – 270
The hardening treatment for most steels consists of heating the steel to a set temperature and then cooling it rapidly by plunging it into oil, water. EN8 and EN353 steel is an easily available and cheap material that is acceptable for heavy-duty applications.
Hardening °C 780-820.
EN353 is re-heated to 780C – 820°C, holding until the temperature is uniform throughout the section, and then quenched in oil, Tempering must be done immediately while the component EN353 is still handed warm. Heat to 150C – 200°c, soak it for 1 – 2 hours / 25mm of a section, and then cooled in still air. Hardness after Tempering: 62-64 HRC.
|Thermal Conductivity at °C||20||350||700|
|Thermal Conductivity at °C||20||350||700|
EN353 steel round bars offer a good combination of ductility, strength, and wear resistance. EN353 is a very high-strength alloy engineering steel.
150-200, cooled in the furnace. 1st pre-heating °C: Up to approx. 400 in an air-circulating furnace 2nd and 3rd: 780 and 805°C.
860 – 890°C in air.
|DENSITY (G/CM 3)||8.08|
|DENSITY (LB/IN 3)||0.292|
Pre/post heat precaution required.
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.